Lexmark Multifunction Laser C77x - Menus and Messages Guide - Page 71
Log Output Bin, FTP Bit Depth
View all Lexmark Multifunction Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Using the MFP menus Menu item Log Paper Source Log Output Bin FTP Bit Depth Base file name Custom Job scanning Allow Save as shortcut Background Removal Contrast Purpose Values and descriptions To select the print media source to supply print media for the MFP to print a log of all sent and received FTPs. Envelopes do not apply. Note: This menu item applies to all scan functions. Tray 1* MP Feeder Tray 2 (if an optional drawer is installed) Tray 1 or the standard tray is the specified print media source. The multipurpose feeder is the specified print media source. Tray 2, which is an optional drawer, is the specified print media source. Specifies the output bin that accepts the printed FTP log. The menu item only appears when one optional output bin is installed. A list of available output bins is shown as values, such as Bin 1, Bin 2, and so on based on the number of bins installed. Enables the Text/Photo mode to 1 bit* have smaller file sizes by using 1 bit images when Color is set to Off. 8 bit text entry The default value is the following word: image Note: There is a 53-character limit for the base file name. The following characters or symbols are invalid: * - asterisk : - colon ? - question mark < - less than symbol > - greater than symbol | - vertical bar A time stamp is added to the end of the base file name. Allows for scanning of custom FTP On jobs. Off* This is also known as Job Build. Custom Job is not supported on all models. To set to On, select the check box. To set to Off, clear the check box. Allows saving of FTP addresses as Yes* shortcuts. No When it is set to No, the Save as Shortcut button does not appear on the FTP Destination screen. Adjusts the amount of background -4 to +4 (0*) visible on a copy. -4 sets Background Removal to off. +4 sets Background Removal to the maximum allowed. Specifies the contrast used for the 0-5 FTP job. The default is dependent on the Content menu item. If the Content menu item is reset from the default setting, then the default for Contrast is reset, also. Text default is 5. The default is 0 for items other than text. Settings 71