Lexmark Multifunction Laser C77x - Menus and Messages Guide - Page 105

Understanding MFP messages Message Insert tray [x] Install bin Install duplex Install envelope feeder Install tray [x] Insufficient Memory to Support Scanner Attachment Load manual feeder with [Custom String] Meaning Action Occurs when the MFP detects a missing tray. x can be 1, 2, 3, 4, or 5. Insert the specified tray to clear the message. Touch Cancel Job to cancel the current job if needed. Touch Reset Active Bin to change to another linked bin. The MFP detects that bin [x] is missing where x is the number of the bin. This message occurs when pages are formatted when the bin is present, but before the pages are printed. Between the formatting and printing time, the optional bin is removed from the MFP. • Turn the MFP off, unplug the power cord from the wall outlet, install the specified bin, connect the power cord to a properly grounded outlet, and then restart the MFP. • Touch Cancel Job to cancel the current job. • Touch Reset Active Bin to reset the active bin for a linked set of bins. The MFP detects that the duplex unit is missing. This message occurs when pages are formatted when the duplex unit is present, but before the pages are printed. Between the formatting and printing time, the duplex unit is removed from the MFP. • Turn the MFP off, unplug the power cord from the wall outlet, install the duplex unit, connect the power cord to a properly grounded outlet, and then restart the MFP. • Touch Cancel Job to cancel the current job. The MFP detected the optional envelope drawer is missing between the time the job processes, but before the job prints. Install the optional envelope drawer. The message clears. Touch Cancel Job if needed. Touch Reset Active Bin to reset the active bin for a linked set of bins. The MFP detects that optional Tray [x], where x is the number of the tray, is missing while the job processes, but before the job prints. Sometime during processing, the optional tray is removed. Install the optional tray specified by x. The message clears. Touch Cancel Job if needed. Touch Reset Active Bin to reset the active bin for a linked set of bins. The printer does not have at least 256 MB of total memory; therefore, it cannot support the scanner. This message occurs only during a power-on reset. 1 Turn the printer off. Turn the scanner off. 2 Install additional memory in the printer, so the scanner will function with the printer. 3 Turn the printer on. Turn the scanner on. Occurs when the MFP receives a manual feed request that a specific print media be loaded into the multipurpose feeder. The print media is previously defined as a custom string which appears on the control panel. Touch Continue. • If print media is in the multipurpose feeder, the job continues to print. • If there is no print media in the multipurpose feeder, all requests for additional pages are automatically overridden, and print media is selected from an automatic source. Touch Automatically select media to override manual requests for Manual Paper and Manual Env for the rest of the print job. All requests for additional pages are automatically overridden, and print media is selected from an automatic source. Touch Cancel Job to cancel the current job if needed. Touch Reset Active Bin to change to another linked bin. Attendance messages 105