Lexmark Multifunction Laser C77x - Menus and Messages Guide - Page 36
Standard USB or USB <x>, the Setup Menu if PCL SmartSwitch is - printer for mac
View all Lexmark Multifunction Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Using the MFP menus Menu item Mac Binary PS Purpose Configures the MFP to process Macintosh binary PostScript print jobs. Values and descriptions On The MFP processes raw binary PostScript print jobs from computers using the Macintosh operating system. Note: This setting often causes Windows print jobs to fail. Off The MFP filters PostScript print jobs using standard protocol. Auto* The MFP processes print jobs from computers using either Windows or Macintosh operating systems. Standard USB or USB These menus are only shown if a USB port is available. Use these menu items to change printer settings affecting a Universal Serial Bus (USB) port (USB ). x represents 1 or 2. Menu item PCL SmartSwitch PS SmartSwitch NPA Mode Purpose Values and descriptions Configures the MFP so it On* automatically switches to PCL emulation when a print job received through the USB port requires it, regardless of the default printer language. Off The MFP examines the data on the USB port and selects PCL emulation if the data indicates that is the required printer language. The MFP does not examine the incoming data. The MFP uses PostScript emulation to process the job if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS SmartSwitch is Off. Configures the MFP so it On* automatically switches to PostScript emulation when a print job received through the USB port requires it, regardless of the default printer language. Off The MFP examines data on the USB interface and selects PostScript emulation if the data indicates that is the required printer language. The MFP does not examine the incoming data. The MFP uses PCL emulation to process the job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PCL SmartSwitch is Off. Specifies whether the MFP performs the special processing required for bidirectional communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol. Note: Changing this menu item automatically resets the MFP once the menus are exited. It is reset to configure memory, and any permanent resources, such as fonts or macros, are lost. On Off Auto* The MFP performs NPA processing. If data is not in NPA format, it is rejected as bad data. The MFP does not perform NPA processing. The MFP examines the data to determine the format and then processes it appropriately. Network/Ports 36