Lexmark Multifunction Laser C77x - Menus and Messages Guide - Page 101

Understanding MFP messages Fax status messages Message Answering Call complete Connect bps Dialing Fax failed Fax memory full Job stored for delayed transmission. Line busy No answer No dial tone Queued for sending Receive complete Receiving page [n] Sending page [n] Set clock Waiting for redial Meaning The MFP is answering a fax call. A fax call is completed. The fax is connected. x is the baud rate per second. A fax number is dialed. If the number is too long to fit on the screen, only the word Dialing appears. The fax failed to send. The attempted fax job is canceled since memory is full. The scanning completes for a delayed send fax job. A fax number is dialed, but the fax line is busy. A fax number is dialed, but no connection is made. The MFP does not have a dial tone. The scanning process of a fax job completed, but it is not sent yet because another fax job is being sent or received. As this one job waits for its turn, this message appears for three seconds. The MFP has received an entire fax job. The MFP receives page [n] of the fax job, where n is the number of the page received. The MFP sends page [n] of the fax job, where n is the number of the page sent. The Real Time Clock is not set. This message appears if no other fax status message appears. It remains until the clock is set. Set the clock. The MFP is waiting to redial the fax number. Cancel jobs messages Message Deleting selected job(s) Job cannot be deleted No jobs selected Meaning The Delete button is touched after jobs have been selected. A job in the job list is touched, but it cannot be canceled. The Delete button is touched when no jobs are selected. Fax status messages 101