Lexmark W810n User's Reference (3.7 MB) - Page 131

Replacing supplies NOTE: You can press Go to continue printing for a short while after the Replace PC Kit message appears. However, we strongly recommend that you replace the items in the photoconductor kit immediately. If you do not, the printer will stop operating when Replace PC Kit To Continue appears on the display. You will then have to replace the photoconductor cartridge before you can continue to use the printer. Instructions for replacing the items in the photoconductor kit follow. Replacing the photoconductor cartridge WARNING: After you install a photoconductor cartridge in the printer, do not remove the cartridge and reinstall it in any other printer. Internal printer settings that vary from printer to printer could cause the photoconductor to overdevelop or underdevelop images, resulting in poor print quality or possibly printer damage. CAUTION: Areas inside the printer may be hot. Avoid touching parts inside the printer until they have cooled. 1 Lift the side door latch and lower the side door (Door C). 117