Lexmark W810n User's Reference (3.7 MB) - Page 217
Removing the duplexoption, Detaching the duplexunit
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Removing the duplex option The duplex option consists of two components: the duplex unit (which you must remove first) and the manual feed unit. Some steps in this section instruct you to attach covers and screws that were removed during initial installation of the duplex option. If possible, locate these covers and screws before continuing. If you purchased the Optra W810dn model with the duplex hardware already installed, these covers will not be available. NOTE: This procedure requires a long Phillips screwdriver. Detaching the duplex unit 1 Turn the printer off and unplug the power cord. 2 Remove the connector cover on the right rear corner of the printer. 203 Removing options
203
Removing options
Removing the duplex option
The duplex option consists of two components: the
duplex unit
(which you
must remove first) and the
manual feed unit
.
Some steps in this section instruct you to attach covers and screws that
were removed during initial installation of the duplex option. If possible,
locate these covers and screws before continuing. If you purchased the
Optra W810dn model with the duplex hardware already installed, these
covers will not be available.
NOTE:
This procedure requires a long Phillips screwdriver.
Detaching the duplex unit
1
Turn the printer off and unplug the power cord.
2
Remove the connector cover on the right rear corner of the
printer.