Lexmark W810n User's Reference (3.7 MB) - Page 161
Resetting the printer’s internal counter, on the first line
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Replacing supplies Resetting the printer's internal counter After you replace the fuser, reset the printer's internal counter to clear the Replace Fuser message from the operator panel display. Resetting the counter helps prevent service calls by ensuring that the printer can alert you when it is again time to replace the fuser. The reset process only takes a few minutes. 1 Plug in the printer power cord. 2 Press and hold the Select and Return buttons on the operator panel while you turn the printer on. When CONFIG MENU appears on the first line of the display, release the buttons. MAINT COUNTERS appears on the second line. 3 Press Select. 4 Press Menu> until you see Reset Fuser. 5 Press Select. Resetting Fuser Count appears briefly on the display, and then is replaced by CONFIG MENU on the first line and MAINT COUNTERS on the second line. 6 Press