Lexmark W810n User's Reference (3.7 MB) - Page 25

Printer messages (continued) Message Staples Empty Staples Low Std Bin Full Tray x Empty Tray x Low Tray x Missing USB x Waiting Action The finisher is out of staples, or the stapler is not installed. If necessary, install a new staple cartridge and then reinsert the stapler to clear the message. For more information on replacing staples, see page 148. The finisher has less than 40 staples left in the stapler. Install a new staple cartridge to clear the message. For more information on replacing staples, see page 148. The standard output bin is full. Remove the stack of paper in the bin to clear the message. The specified tray is out of paper. Load paper in the tray to clear the message. For more information, see "Loading paper" on page 79. The specified tray is low on paper. Add more paper to clear the message. For more information, see "Loading paper" on page 79. Insert the specified tray completely into the printer. Note: If you cannot clear this message and the specified tray is a 500-sheet paper tray (tray 2 or tray 3, or an optional tray 4), make sure the left paper guide is properly inserted and snaps into the slot at the front of the tray. For detailed instructions, see step 5 on page 93. The printer is processing data through the specified USB port. The printer has received a page of data to print, but is waiting for an End of Job command, Form Feed command, or for additional data. When Waiting is displayed, you can: • Press Go to print the contents of the buffer. • Cancel the current job. Press Menu> or or