Lexmark W810n User's Reference (3.7 MB) - Page 40
Setup, Guide, Complete Printer, Reference, on Lexmark's Web
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Print quality problems (continued) Symptom Incorrect margins Cause Solution The paper tray is not completely inserted into the printer. Push the tray firmly into the printer to make sure it is fully installed. The left paper guide in the 500-sheet tray is set for a different size paper than what is loaded in the tray. Insert the paper guide in the correct position for the size paper in the tray. See page 88 for information on loading the 500-sheet drawer. You did not set the correct paper size for tray 1. After loading paper in tray 1, set the default paper size from the printer operator panel: 1 From the Paper Menu, select Paper Size. 2 Select Tray 1 Size. 3 Select the correct paper size from the list of available values. For information on using the operator panel, see page ix. The locking clips are not securing the drawer to the printer. Attach the four locking clips to the drawer. Refer to the Setup Guide for installation instructions. The margin settings for the selected tray need to be adjusted. Adjust the appropriate margin settings in the Registration Menu. Refer to the Complete Printer Reference on Lexmark's Web site for information about accessing this menu. The paper feed rollers Call for service. are worn. Troubleshooting 26