Lexmark W810n User's Reference (3.7 MB) - Page 188
To adjust the finisher's height, Turn the knobs clockwise to raise the finisher. Turn the knobs
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Finisher To adjust the finisher's height: 1 Locate the four wing bolts under the finisher's base ledge on the side that faces the printer. 2 Turn the wing bolts counterclockwise to loosen them. 3 Turn the knobs on the base ledge to adjust the finisher's height. Turn the knobs clockwise to raise the finisher. Turn the knobs counterclockwise to lower it. 174
174
Finisher
To adjust the finisher’s height:
1
Locate the four wing bolts under the finisher’s base ledge on
the side that faces the printer.
2
Turn the wing bolts counterclockwise to loosen them.
3
Turn the knobs on the base ledge to adjust the finisher’s
height.
Turn the knobs clockwise to raise the finisher. Turn the knobs
counterclockwise to lower it.