Lexmark W810n User's Reference (3.7 MB) - Page 30

16

Messages

54 Serial

Option

x

Error

The printer has detected a serial interface error on

an optional serial port. Make sure the serial link is

set up correctly and you are using the appropriate

cable.

•

Press

Go

to clear the message and continue

printing. The job may not print correctly.

•

Reset the printer. Press

Menu>

or

<Menu

. The

Job Menu is displayed. Press

Menu>

or

<Menu

until Reset Printer appears on the second line.

Press

Select

.

54 Std Par ENA

Conne

ction Lost

54 Par

x

ENA

Connection Lost

The printer has lost the connection to an external

print server (also called an external network adapter

or ENA).

•

Make sure the cable connecting the ENA and the

printer is securely attached. Turn the printer off

and then on again to see if the printer recognizes

the connection.

•

Press

Go

to clear the message. The printer

erases any reference to the ENA and then resets.

54 Ser

x

Fax

Connection Lost

The printer has lost the connection to the external

modem. If the Fax Port menu item in the Fax Menu is

not set to Disabled, the printer automatically

assumes a modem is connected for fax processing.

If the printer does not detect a modem connected to

the serial port, it displays this message.

•

Reconnect the modem to the serial port to enable

the printer to receive faxes.

•

Press

Go

to clear the message and continue

normal printer operations. You cannot receive

faxes until the modem is reconnected.

If you do not intend to configure the serial port for

receiving faxes, set the Fax Port menu item to

Disabled to prevent the printer from displaying this

message.

55 Insufficient

Fax Buffer

The buffer used to process data is too full to receive

an incoming fax. This has broken the connection

between the printer and the sending fax machine.

The printer will not accept additional fax data until

sufficient fax buffer space is made available.

Press

Go

to clear the message and print any fax

data stored in the fax buffer. Some data may not

print or may not print correctly.

To avoid another

55 Insufficient Fax Buffer

, increase

the size of the Fax Buffer in the Fax Menu.

Printer messages (continued)

Message

Action

Section	Page
Preface	7
Introducing the LexmarkOptraW810 printer	7
Standard model	7
Fully configured model	8
Printer operator panel	9
About this book	11
Printer pocket	11
Conventions	12
Other sources of information	12
Setup Guide	12
Drivers, MarkVision and UtilitiesCD	12
Lexmark Web site	13
Complete Printer Reference	13
Understanding printer messages	15
Troubleshooting	33
Print quality problems	34
Paper feed problems	42
Other printing problems	44
Finisher problems	49
Mailbox problems	52
Calling for service	53
Clearing paper jams	55
Understanding paper jam messages	55
Paper path	56
Message maps	57
Clearing jams from the printer	58
Tray 4 (optional 2500-sheet drawer)	58
Trays 2 and 3	62
Tray 1	67
Manual feed unit	70
Duplex unit	71
Photoconductor area	72
Fuser area	74
Clearing jams from the mailbox option	76
Clearing jams from the finisher option	83
Loading paper	93
Loading the paper trays	93
Loading tray 1	94
Loading trays 2 and 3	102
Loading the 2500sheettray (tray 4)	115
Tips for successful printing	118
Storing media	118
Avoiding paper jams	119
Replacing supplies	121
Determining the status of supplies	122
Requesting audible alarms	123
Storing supplies	123
Recycling used supplies	124
Installing a toner cartridge	125
Installing the photoconductor kit	130
Replacing the photoconductor cartridge	131
Replacing the paper dust remover	138
Installing the transfer kit	144
Replacing the transfer roller	145
Replacing the ozone filter	149
Resetting the printer’s internal counter	153
Installing the fuser	154
Resetting the printer’s internal counter	161
Installing a staple cartridge	162
Maintaining the finisher option	169
Clearing a staple jam	170
Priming the stapler	176
Emptying the hole punch box	177
Resetting the printer’s internalcounter	182
Aligning the finisher with the printer	183
Adjusting the finisher’s standing position	183
Adjusting the finisher’s height	187
Aligning the mailbox option	191
Adjusting the mailbox’s standing position	192
Adjusting the mailbox’s height	197
Removing options	203
Removing the transport unit	204
Detaching a mailbox or a finisher	207
Removing memory and option cards	210
Accessing the system board	210
Removing a memory card	212
Removing an option card	213
Removing a hard disk	215
Removing the duplexoption	217
Detaching the duplexunit	217
Removing the manual feed unit	221
Adjusting the side door tension	224
Removing an optional drawer	226
Using the print and hold function	229
Printing and deleting held jobs	229
Recognizing when format errors occur	231
Repeat Print	231
Reserve Print	232
Verify Print	232
Confidential jobs	232
Appendix: Printer menus	235

Lexmark W810n User's Reference (3.7 MB) - Page 30

Serial, Option, Error, Menu&gt, <Menu, Select, Std Par ENA, Conne, Connection Lost, Insufficient

Page 30 highlights