Lexmark W810n User's Reference (3.7 MB) - Page 69
bracket that extends from inside the printer, as shown.
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
5 Reinsert the tray. a Make sure the pressure plate is pressed down inside the tray. b Align the left side of the tray with the guides inside the opening. c Insert the rails on the right side of the tray into the metal bracket that extends from inside the printer, as shown. NOTE: If the metal bracket slides into the printer while you are inserting the rails, re-extend the bracket. Metal bracket 55 Clearing jams
55
Clearing jams
5
Reinsert the tray.
a
Make sure the pressure plate is pressed down inside the
tray.
b
Align the left side of the tray with the guides inside the
opening.
c
Insert the rails on the right side of the tray into the metal
bracket that extends from inside the printer, as shown.
NOTE:
If the metal bracket slides into the printer while you are
inserting the rails, re-extend the bracket.
Metal bracket