Lexmark W810n User's Reference (3.7 MB) - Page 153

Replacing supplies Resetting the printer's internal counter After you replace the items in the transfer kit, reset the printer's internal counter to clear the Replace Transfer message from the operator panel display. Resetting the counter helps prevent service calls by ensuring that the printer can alert you when it is again time to replace the transfer kit. The reset process only takes a few minutes. WARNING: Before you begin this procedure, make sure the printer is not busy processing a print job. Turning the printer off deletes all held jobs stored in printer memory. Open the Job Menu to review the held jobs before continuing. 1 Turn the printer off. 2 Press and hold the Select and Return buttons on the operator panel while you turn the printer on. When CONFIG MENU appears on the first line of the display, release the buttons. MAINT COUNTERS appears on the second line. 3 Press Select. 4 Press Menu> until you see Reset Transfer. 5 Press Select. Resetting Transfer Count appears briefly on the display, and then is replaced by CONFIG MENU on the first line and MAINT COUNTERS on the second line. 6 Press