Lexmark W810n User's Reference (3.7 MB) - Page 31

Messages Printer messages (continued) Message 56 Serial Port x Disabled 56 Std Parallel Port Disabled 56 Parallel Port x Disabled 58 Too Many Disks Installed 61 Defective Disk 62 Disk Full 63 Unformatted Disk Action Data has been sent to the printer through a serial port, but the serial port is disabled. Press Go to clear the message. The printer discards any data received through the serial port. To avoid another 56 Serial Port x Disabled error message, make sure the Serial Buffer menu item in the Serial Menu is not set to Disabled. Data has been sent to the printer through a parallel port, but the parallel port is disabled. Press Go to clear the message. The printer discards any data received through the parallel port. To avoid another error message, make sure the Parallel Buffer menu item in the Parallel Menu is not set to Disabled. The printer only supports one disk option at a time. To clear the message turn the printer off and unplug the printer. Remove one of the disk options from the printer. See page 196 for information on removing disks. The printer detects a defective disk option. Press Go to clear the message and continue printing. You must install a different disk option before you can perform any operations that require a hard disk. See page 196 for information on removing a disk. There is not enough memory on the disk option to store the data sent to the printer. Press Go to clear the message and continue processing. Any information not previously stored on the disk option is deleted. The printer detects an unformatted disk option. Press Go to clear the message and continue printing. You must format the disk before you can perform any disk operations. To format the disk, select Format Disk from the Utilities Menu. If the error message remains, the disk option may be defective and require replacing. Disk operations are not allowed until the defective disk is replaced and the new one is formatted. 17