Lexmark W810n User's Reference (3.7 MB) - Page 182

Finisher Resetting the printer's internal counter After you empty the hole punch box, reset the internal counter to clear the Empty Box K message. Resetting the counter helps prevent service calls by ensuring that the printer alerts you when the hole punch box again becomes full. The reset process only takes a few minutes. WARNING: Before you begin this procedure, make sure the printer is not busy processing a print job. Turning the printer off deletes all held jobs stored in printer memory. Open the Job Menu to review the held jobs before continuing. 1 Turn the printer off. 2 Press and hold the Select and Return buttons on the operator panel while you turn the printer on. When CONFIG MENU appears on the first line of the display, release the buttons. MAINT COUNTERS appears on the second line. 3 Press Select. 4 Reset Hole Punch appears on the second line. 5 Press Select. Resetting Hole Punch Count appears briefly on the display, and then is replaced by CONFIG MENU on the first line and MAINT COUNTERS on the second line. 6 Press