Lexmark W810n User's Reference (3.7 MB) - Page 226
Removing an optional drawer
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
Removing an optional drawer Before you can remove an optional drawer, you must remove the locking clips that secure it to the printer. You need a Phillips screwdriver for this procedure. NOTE: The illustrations in this section show removing a 2500-sheet drawer. The procedure is the same if you are removing an optional 500-sheet drawer. 1 Turn off the printer and unplug the power cord. 2 If you have attached a finisher option or a mailbox option to your printer, detach the option before continuing. See page 193 for detailed instructions. 3 Pull open trays 3 and 4. 4 Remove the locking clip from the left and right sides of the trays, as shown. 5 Close the trays. 212 Removing options
212
Removing options
Removing an optional drawer
Before you can remove an optional drawer, you must remove the locking
clips that secure it to the printer. You need a Phillips screwdriver for this
procedure.
NOTE:
The illustrations in this section show removing a
2500-sheet drawer. The procedure is the same if you are
removing an optional 500-sheet drawer.
1
Turn off the printer and unplug the power cord.
2
If you have attached a finisher option or a mailbox option to
your printer, detach the option before continuing.
See page 193 for detailed instructions.
3
Pull open trays 3 and 4.
4
Remove the locking clip from the left and right sides of the
trays, as shown.
5
Close the trays.