Maytag MVWB800VQ Use and Care Guide - Page 6

See Tools - 28

Get Maytag MVWB800VQ - Bravos Washer With Window Lid PDF manuals and user guides View all Maytag MVWB800VQ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

The washer can be installed using the standpipe drain system (floor or wail), the laundry tub drain system, or the floor drain system. Select the drain hose installation method you need. See "Tools and Parts." Standpipe drain system--wall or floor (views A & B) The standpipe drain requires a minimum diameter standpipe of 2" (5.0 cm). The minimum carry-away capacity can be no less than 1 7 gal. (64 I_) per minute. A 2" (5.0 cm) diameter to 1" (2.5 cm) diameter standpipe adapter kit is available. See "Tools and Parts." The top of the standpipe must be at [east 39" (99.0 cm) high and no higher than 96" (244.0 cm) from the bottom of the washer. -F- (99cm) A B iLaundry tub drain system (view C) The laundry tub needs a minimum 20 gal. (76 L) capacity. The top of the laundry tub must be at least 39" (99.0 cm) above the floor and no higher than 96" (244.0 cm) from the bottom of the washer. Floor drain system (view D) The floor drain system requires a siphon break that may be purchased separately. See "Tools and Parts." The siphon break must be a minimum of 28" (71.0 cm) from the bottom of the washer. Additional hoses might be needed. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions fire, or electrical shock. can result in death, A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A timedelay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided. [] This washer is equipped with a power supply cord having a 3 prong grounding plug. [] To minimize possible shock hazard, the cord must be plugged into a mating, grounded 3 prong outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician. [] if codes permit and a separate ground wire is used, it is recommended electrician determine that the ground path is adequate. that a qualified [] Do not ground to a gas pipe. ......... (728,, C D 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
The washer
can be
installed
using
the
standpipe
drain
system
(floor
or wail),
the
laundry
tub
drain
system,
or the floor
drain
system.
Select
the
drain
hose
installation
method
you
need.
See "Tools
and
Parts."
Standpipe
drain
system--wall
or
floor
(views
A&
B)
The standpipe
drain
requires
a minimum
diameter
standpipe
of 2" (5.0
cm). The minimum
carry-away
capacity
can be
no less than
1 7 gal.
(64 I_) per
minute.
A 2" (5.0
cm)
diameter
to
1" (2.5
cm)
diameter
standpipe
adapter
kit is available.
See "Tools
and
Parts."
The top
of the
standpipe
must
be at [east 39"
(99.0
cm)
high
and
no higher
than
96" (244.0
cm)
from
the
bottom
of the washer.
-F-
(99cm)
A
B
iLaundry
tub
drain
system
(view
C)
The
laundry
tub
needs
a minimum
20 gal.
(76
L) capacity.
The top
of the
laundry
tub
must
be
at least 39"
(99.0
cm)
above
the
floor
and
no higher
than
96"
(244.0
cm)
from
the bottom
of
the washer.
Floor
drain
system
(view
D)
The floor
drain
system
requires
a siphon
break
that
may be purchased
separately.
See "Tools
and
Parts."
The siphon
break
must
be a minimum
of 28"
(71.0
cm) from
the
bottom
of
the washer.
Additional
hoses
might
be needed.
C
.........
(728,,
D
[]
[]
[]
[]
Electrical
Shock
Hazard
Plug
into
a
grounded
3 prong
outlet.
Do
not
remove
ground
prong.
Do
not
use
an
adapter.
Do
not
use
an
extension
cord.
Failure
to
follow
these
instructions
can
result
in
death,
fire,
or electrical
shock.
A 120
volt,
60
Hz.,
AC only,
15- or 20-amp,
fused
electrical
supply
is required.
A time-
delay
fuse or circuit
breaker
is recommended.
It is recommended
that
a separate
circuit
serving
only
this
appliance
be provided.
This washer
is equipped
with
a power
supply
cord
having
a 3 prong
grounding
plug.
To minimize
possible
shock
hazard,
the
cord
must
be plugged
into
a mating,
grounded
3 prong
outlet,
grounded
in accordance
with
local
codes
and
ordinances.
If a mating
outlet
is not
available,
it is the
personal
responsibility
and
obligation
of the
customer
to
have the properly
grounded
outlet
installed
by a qualified
electrician.
if codes
permit
and
a separate
ground
wire
is used,
it is recommended
that
a qualified
electrician
determine
that
the ground
path
is adequate.
Do
not
ground
to a gas pipe.
6