McAfee M4050 Troubleshooting Guide - Page 38
Loss of connectivity between the Sensor and Manager
UPC - 731944582832
View all McAfee M4050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
McAfee® Network Security Platform 6.0 Troubleshooting Network Security Platform Debug command name/Parameter(s) set aidlog Available parameters: off enable disable where is the attack ID. layer2 forward tcp Available parameters: enable/disable/0-65535 /[0-65535(optional)] layer2 forward udp Available parameters: enable/disable/0-65535 /[0-65535(optional)] Description Sets the debugging for false positives on the Sensor for a specific attack ID. Configures the Layer2 forwarding to a TCP port or to a range of TCP ports. Configures the Layer2 forwarding to a single or range of UDP ports. layer2 forward vlan Available parameters: enable/disable/0-4095 /[0-4095(optional)] layer 2 forward vlan interface Available parameters: enable/disable/04095/[04095(optional)]/ layer2 forward clear Available parameters: all/tcp/udp/vlan Enables or disables a single VLAN ID or a range of vlan IDs on all the interfaces available on the Sensor. Enables or disables a single VLAN ID or a range of VLAN IDs on specific interfaces available on the Sensor. Removes all the ports or VLANs that are enabled for layer2 forwarding.It removes all the port numbers ranging from 0 to 65535 that were enabled for TCP and UDP. Similarly all the VLAN IDs ranging from 0 to 4095 are removed. Loss of connectivity between the Sensor and Manager If you have previously established a connection between the Sensor and the Manager and the connection fails, try the following: Check network connectivity. View the system status on both the Manager and the Sensor. 29