Netgear AC1000-WiFi User Manual - Page 20
To automatically set up your router, On/Off, Close and reopen the browser or clear the browser cache. - router review
View all Netgear AC1000-WiFi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
AC1000 WiFi Router Model R6080 To automatically set up your router: 1. Turn the router on by pressing the On/Off button. 2. Make sure that your computer or mobile device is connected to the router with an Ethernet cable (wired) or over WiFi with the preset security settings listed on the label. Note: If you want to change the router's WiFi settings, use a wired connection to avoid being disconnected when the new WiFi settings take effect. 3. Launch a web browser. The browser goes to http://www.routerlogin.net and the NETGEAR installation assistant displays. 4. If the browser does not display the NETGEAR installation assistant, enter http://www.routerlogin.net in the address field. 5. Follow the onscreen instructions. The router connects to the Internet. 6. If the browser does not display the installation assistant page, do the following: • Make sure that the computer is connected to one of the four LAN Ethernet ports or over WiFi to the router. • Make sure that the router is receiving power and that its Power LED is lit. • Close and reopen the browser or clear the browser cache. • Browse to http://www.routerlogin.net. • If the computer is set to a static or fixed IP address (this setting is uncommon), change it to obtain an IP address automatically from the router. 7. If the router does not connect to the Internet, do the following: a. Review your settings. Make sure that you selected the correct options and typed everything correctly. b. Contact your ISP to verify that you are using the correct configuration information. c. Read You Cannot Access the Internet on page 129. If problems persist, register your NETGEAR product and contact NETGEAR technical support. Connect to the Network and 20 Access the Router User Manual