Netgear FVG318v1 FVG318 Reference Manual - Page 151
Appendix A Default Settings and Technical Specifications, Default Settings
View all Netgear FVG318v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Appendix A Default Settings and Technical Specifications Default Settings You can use the reset button located on the front of your device to reset all settings to their factory defaults. This is called a hard reset. • To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the TEST LED blinks rapidly). Your device will return to the factory configuration settings shown in below. (The Factory Default Restore button on the rear panel is shown in the illustration "The FVG318 Rear Panel" on page 1-6.) • Pressing the reset button for a shorter period of time will simply cause your device to reboot. After you install the VPN firewall, use the procedures below to customize any of the settings to better meet your networking needs. Feature Router Login User Login URL User Name (case sensitive) Login Password (case sensitive) Internet Connection WAN MAC Address WAN MTU Size Port Speed Local Network (LAN) Lan IP Subnet Mask RIP Direction RIP Version RIP Authentication DHCP Server Default Behavior http://192.168.0.1 admin password Use Default address 1500 AutoSense 192.168.0.1 255.255.255.0 None Disabled None Enabled Default Settings and Technical Specifications A-1 v1.0, September 2007