Netgear FVG318v1 FVG318 Reference Manual - Page 159
Activating the VPN Tunnel, The FVG318-to-FVG318 Case
View all Netgear FVG318v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual Note: The default log in address for the FVG318 router is http://192.168.0.1 with the default user name of admin and default password of password. The login address will change to the local LAN IP subnet address after you configure the router. The user name and password will also change to the ones you have chosen to use in your installation. Activating the VPN Tunnel You can activate the VPN tunnel by testing connectivity and viewing the VPN tunnel status information as described in the following flowchart: Start Fail Test Step 1 Pass Ping Remote LAN IP Address Fail Test Step 2 Pass Ping Remote WAN IP Address Fix the Router Network and then Retest Figure C-2 Fix the VPN Tunnel and then Retest Test Step 3 View VPN Tunnel Status End All traffic from the range of LAN IP addresses specified on the router at Gateway A and the router at Gateway B will now flow over a secure VPN tunnel. The FVG318-to-FVG318 Case Table C-1. Policy Summary VPN Consortium Scenario: Type of VPN Scenario 1 LAN-to-LAN or Gateway-to-Gateway VPN Configuration of NETGEAR FVG318 C-3 v1.0, September 2007