Netgear FVG318v1 FVG318 Reference Manual - Page 35

ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual 5. Click Apply to save your configuration. Configuring Your Time Zone The VPN firewall uses the Network Time Protocol (NTP) to obtain the current time and date from one of several Network Time Servers on the Internet. In order to localize the time for your log entries, you must specify your Time Zone. Figure 2-10 To specify your time zone: 1. Select Administration > Time Zone from the menu. The Time Zone screen will display. 2. From the Date/Time pull-down menu, select your local time zone. This setting will be used for the blocking schedule and for time-stamping log entries. 3. Automatically Adjust for Daylight Savings Time. Check this box for enable daylight savings time. Note: If your region uses Daylight Savings Time, you must manually select Adjust for Daylight Savings Time on the first day of Daylight Savings Time, and deselect it at the end. Enabling Daylight Savings Time will add one hour to the standard time. 4. Select an NTP Server. • The Use Default NTP Servers is selected by default. If this is enabled, then the RTC (Real-Time Clock) is updated regularly by contacting a NETGEAR NTP Server on the Internet. Connecting the Firewall to the Internet v1.0, September 2007 2-11