Netgear FVG318v1 FVG318 Reference Manual - Page 45

ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual Security Check List for SSID and WEP Settings For a new wireless network, print or copy this form and fill in the configuration parameters. For an existing wireless network, the person who set up or is responsible for the network will be able to provide this information. Be sure to set the Regulatory Domain correctly as the first step. • SSID: The Service Set Identification (SSID) identifies the wireless local area network. Wireless is the default FVG318 SSID. However, you may customize it by using up to 32 alphanumeric characters. Write your customized SSID on the line below. Note: The SSID in the VPN firewall router is the SSID you configure in the wireless adapter card. All wireless nodes in the same network must be configured with the same SSID: • Authentication Circle one: Open System or Shared Key. Choose "Shared Key" for more security. Note: If you select shared key, the other devices in the network will not connect unless they are set to Shared Key as well and have the same keys in the same positions as those in the FVG318. • WEP Encryption Keys For all four 802.11b keys, choose the Key Size. Circle one: 64 or 128 bits Key 1 Key 2 Key 3 Key 4 WPA-PSK or WPA2-PSK (Pre-Shared Key) Record the WPA-PSK or WPA2-PSK key: Key WPA or WPA2 RADIUS Settings For WPA or WPA2, record the following RADIUS settings: Server Name/IP Address: Primary Secondary Port Shared Key Use the procedures described in the following sections to configure the FVG318. Store this information in a safe place. Configuring Wireless Connectivity 3-7 v1.0, September 2007