Netgear GSM7312 FSM7326P User Manual - Page 118

User Account Management Commands, show users, config users add, VLAN Identifier, Associated Instance

Page 118 highlights

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software VLAN Identifier Associated Instance Identifier for the associated multiple spanning tree instance or "CST" if associated with the common and internal spanning tree. User Account Management Commands These commands manage user accounts. show users This command displays the configured user names and their settings. This command is only available for users with readwrite privileges. The SNMPv3 fields will only be displayed if SNMP is available on the system. Format User Name Access Mode SNMPv3AccessMode SNMPv3Authentication SNMPv3Encryption show users The name the user will use to login using the serial port, Telnet or Web. A new user may be added to the switch by entering a name in a blank entry. The user name may be up to 8 characters, and is not case sensitive. Two users are included as the factory default, admin and guest. Shows whether the operator is able to change parameters on the switch(Read/ Write) or is only able to view them(Read Only). As a factory default, admin has Read/Write access and guest has Read Only access. There can only be one Read/ Write user and up to 5 Read Only users. This field displays the SNMPv3 Access Mode. If the value is set to ReadWrite, the SNMPv3 user will be able to set and retrieve parameters on the system. If the value is set to ReadOnly, the SNMPv3 user will only be able to retrieve parameter information. The SNMPv3 access mode may be different than the CLI and Web access mode. This field displays the authentication protocol to be used for the specified login user. This field displays the encryption protocol to be used for the specified login user. config users add This command adds a new user (account) if space permits. The account is up to eight alphanumeric characters. The is not case-sensitive. Six user names can be defined. Format config users add 7-56 202-10009-01 Switching Commands

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
7-56
Switching Commands
202-10009-01
VLAN Identifier
Associated Instance
Identifier for the associated multiple spanning tree instance or "CST" if
associated with the common and internal spanning tree.
User Account Management Commands
These commands manage user accounts.
show users
This command displays the configured user names and their settings. This command is only
available for users with readwrite privileges. The SNMPv3 fields will only be displayed if SNMP
is available on the system.
Format
show users
User Name
The name the user will use to login using the serial port, Telnet or Web. A new
user may be added to the switch by entering a name in a blank entry. The user
name may be up to 8 characters, and is not case sensitive. Two users are
included as the factory default, admin and guest.
Access Mode
Shows whether the operator is able to change parameters on the switch(Read/
Write) or is only able to view them(Read Only). As a factory default, admin has
Read/Write access and guest has Read Only access. There can only be one Read/
Write user and up to 5 Read Only users.
SNMPv3AccessMode
This field displays the SNMPv3 Access Mode. If the value is set to
ReadWrite,
the SNMPv3 user will be able to set and retrieve parameters on
the system. If the value is set to
ReadOnly,
the SNMPv3 user will only be
able to retrieve parameter information. The SNMPv3 access mode may be
different than the CLI and Web access mode.
SNMPv3Authentication
This field displays the authentication protocol to be used for the specified login
user.
SNMPv3Encryption
This field displays the encryption protocol to be used for the specified login
user.
config users add
This command adds a new user (account) if space permits. The account <name> is up to eight
alphanumeric characters. The <name> is not case-sensitive.
Six user names can be defined.
Format
config users add
<
name
>