Netgear GSM7312 FSM7326P User Manual - Page 155
config router rip interface authtypekey - default password
UPC - 606449030693
View all Netgear GSM7312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software config router rip interface authtypekey This command sets the RIP Version 2 Authentication Type and Key for the specified interface. The value of is either none or simple. The value for authentication key [key] must be 16 bytes or less. The [key] is composed of standard displayable, non-control keystrokes from a Standard 101/102-key keyboard. Default Default Format The default authentication type is none. The default password key is an empty string. Unauthenticated interfaces do not need an authentication key. config router rip interface authtypekey [key] config router rip interface defaultmetric This command specifies the metric value that is to be used for the default route entry (0.0.0.0 with subnet mask = 0.0.0.0) in RIP updates originating from this interface.Valid values for range from 0 to 15. Note that a metric value of 0 suppresses default route originations (although a default route may be propagated on this interface from another router). A metric value of 1 instructs the router to always advertise a default route entry with a metric of 1 in its route update messages, which could adversely affect network operation. Default Format 0 config router rip interface defaultmetric config router rip interface mode This command enables or disables RIP on a router interface. The value for is either enable or disable. Default Format disable config router rip interface mode config router rip interface version receive This command configures the interface to allow RIP control packets of the specified version(s) to be received. Routing Commands 202-10009-01 8-13