Netgear GSM7312 FSM7326P User Manual - Page 138

transfer upload filename, transfer download mode

Page 138 highlights

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software transfer upload filename This command sets the name for the file that is uploaded from the switch. The switch "remembers" the last file name used. Append the file path to the file name if the string is less than 31 characters. Otherwise, use the "transfer upload path" command, and the File Name will be appended to the File Path. Note: This command is valid only when the Transfer Mode is TFTP. See "transfer upload mode" . Default Blank Format transfer upload filename transfer upload datatype This command sets the type of file to upload from the switch. Format transfer upload datatype The datatype is one of the following: config errorlog msglog traplog Configuration file. Error log. Message log. Trap log (the default). transfer upload start This command starts an upload transfer after displaying current settings and upon confirmation. Format transfer upload start transfer download mode This command specifies whether XMODEM or TFTP mode is used when uploading from the switch. Default Format xmodem. This is valid only when the transfer is initiated by the serial EIA 232 port. transfer download mode 7-76 202-10009-01 Switching Commands

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
7-76
Switching Commands
202-10009-01
transfer upload filename
This command sets the name for the file that is uploaded from the switch. The switch “remembers”
the last file name used.
Append the file path to the file name if the string is less than 31 characters. Otherwise, use the
“transfer upload path”
command, and the File Name will be appended to the File Path.
Note:
This command is valid only when the Transfer Mode is TFTP. See “transfer upload mode” .
Default
Blank
Format
transfer upload filename
<name>
transfer upload datatype
This command sets the type of file to upload from the switch.
Format
transfer upload datatype
<config|errorlog|msglog|traplog>
The datatype is one of the following:
config
Configuration file.
errorlog
Error log.
msglog
Message log.
traplog
Trap log (the default).
transfer upload start
This command starts an upload transfer after displaying current settings and upon confirmation.
Format
transfer upload start
transfer download mode
This command specifies whether XMODEM or TFTP mode is used when uploading from the
switch.
Default
xmodem
. This is valid only when the transfer is initiated by the serial EIA 232
port.
Format
transfer download mode
<xmodem|tftp>