Netgear GSM7312 FSM7326P User Manual - Page 81
config snmpcommunity mode, show snmptrap, config snmptrap create, changed back to Enable.
UPC - 606449030693
View all Netgear GSM7312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software config snmpcommunity mode This command activates or deactivates an SNMP community. If a community is enabled, an SNMP manager associated with this community manages the switch according to its access right. If the community is disabled, no SNMP requests using this community are accepted. In this case the SNMP manager associated with this community cannot manage the switch until the Status is changed back to Enable. Default Format The default private and public communities are enabled by default. The four undefined communities are disabled by default. config snmpcommunity mode show snmptrap This command displays SNMP trap receivers. Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring within the switch or on the network. Six trap receivers are simultaneously supported. Format SNMP Trap Name IP Address Status show snmptrap The community string of the SNMP trap packet sent to the trap manager. This may be up to 16 alphanumeric characters. This string is case sensitive. The IP address to receive SNMP traps from this device. Enter 4 numbers between 0 and 255 separated by periods. A pull down menu that indicates the receiver's status(enabled or disabled) and allows the administrator/user to perform actions on this user entry: Enable - send traps to the receiver. Disable - do not send traps to the receiver. Delete - remove the table entry. config snmptrap create This command adds an SNMP trap name. The maximum length of name is 16 case-sensitive alphanumeric characters. Default Format The default name for the six undefined community names is Delete. config snmptrap create config snmptrap delete This command deletes trap receivers for a community. Format config snmptrap delete Switching Commands 202-10009-01 7-19