Netgear GSM7312 FSM7326P User Manual - Page 170
config router ospf extlsdblimit, Router Discovery Commands, config router rtrdiscovery adminmode
UPC - 606449030693
View all Netgear GSM7312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software config router ospf extlsdblimit This command configures the external LSDB limit for OSPF. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches the external LSDB limit, the router enters overflow state. The router never holds more than the external LSDB limit non-default AS-external-LSAs in it database. The external LSDB limit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. The range for is -1 to 2147483647. Default Format -1 config router ospf extlsdblimit Router Discovery Commands config router rtrdiscovery adminmode This command enables or disables Router Discovery on an interface. The possible values for are enable and disable. Default Format enable config router rtrdiscovery adminmode config router rtrdiscovery maxinterval This command configures the maximum time, in seconds, allowed between sending router advertisements from the interface. The range for maxinterval is 4 to 1800 seconds. Default Format 600 config router rtrdiscovery maxinterval config router rtrdiscovery mininterval This command configures the minimum time, in seconds, allowed between sending router advertisements from the interface. The range for mininterval is 3 to the value of maxinterval. Default Format 0.75 * maxinterval config router rtrdiscovery mininterval 8-28 202-10009-01 Routing Commands