Netgear GSM7312 FSM7326P User Manual - Page 70

x Pause Frames Received, GVRP PDU's Received

Page 70 highlights

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software Transmit Discards Protocol Statistics Total Errors - the sum of Single, Multiple, and Excessive Collisions. FCS Errors - the total number of packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad Frame Check Sequence (FCS) with an integral number of octets Oversized - the total number of frames that exceeded the max permitted frame size. This counter has a max increment rate of 815 counts per sec. at 10 Mb/s. Underrun Errors - the total number of frames discarded because the transmit FIFO buffer became empty during frame transmission. Total Discards - the sum of single collision frames discarded, multiple collision frames discarded, and excessive frames discarded. Single Collision Frames - a count of the number of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. Multiple Collision Frames - a count of the number of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. Excessive Collisions - a count of frames for which transmission on a particular interface fails due to excessive collisions. Port Membership - the number of frames discarded on egress for this port due to egress filtering being enabled. VLAN Viable Discards - the number of frames discarded on this port when a lookup on a particular VLAN occurs while that entry in the VLAN table is being modified, or if the VLAN has not been configured. BPDU's received - the count of BPDU's (Bridge Protocol Data Units) received in the spanning tree layer. BPDU's Transmitted - the count of BPDU's (Bridge Protocol Data Units) transmitted from the spanning tree layer. 802.3x Pause Frames Received - a count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. GVRP PDU's Received - the count of GVRP PDU's received in the GARP layer. GVRP PDU's Transmitted - the count of GVRP PDU's transmitted from the GARP layer. GVRP Failed Registrations - the number of times attempted GVRP registrations could not be completed. GMRP PDU's received - the count of GMRP PDU's received in the GARP layer. GMRP PDU's Transmitted - the count of GMRP PDU's transmitted from the GARP layer. GMRP Failed Registrations - the number of times attempted GMRP registrations could not be completed. 7-8 Switching Commands 202-10009-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
7-8
Switching Commands
202-10009-01
Total Errors
- the sum of Single, Multiple, and Excessive Collisions.
FCS Errors
- the total number of packets transmitted that had a length
(excluding framing bits, but including FCS octets) of between 64 and 1518
octets, inclusive, but had a bad Frame Check Sequence (FCS) with an integral
number of octets
Oversized
- the total number of frames that exceeded the max permitted frame
size. This counter has a max increment rate of 815 counts per sec. at 10 Mb/s.
Underrun Errors
- the total number of frames discarded because the transmit
FIFO buffer became empty during frame transmission.
Transmit Discards
Total Discards
- the sum of single collision frames discarded, multiple collision
frames discarded, and excessive frames discarded.
Single Collision Frames
- a count of the number of successfully transmitted
frames on a particular interface for which transmission is inhibited by exactly
one collision.
Multiple Collision Frames
- a count of the number of successfully transmitted
frames on a particular interface for which transmission is inhibited by more than
one collision.
Excessive Collisions
- a count of frames for which transmission on a particular
interface fails due to excessive collisions.
Port Membership
- the number of frames discarded on egress for this port due
to egress filtering being enabled.
VLAN Viable Discards
- the number of frames discarded on this port when a
lookup on a particular VLAN occurs while that entry in the VLAN table is being
modified, or if the VLAN has not been configured.
Protocol Statistics
BPDU's received
- the count of BPDU's (Bridge Protocol Data Units) received
in the spanning tree layer.
BPDU's Transmitted
- the count of BPDU's (Bridge Protocol Data Units)
transmitted from the spanning tree layer.
802.3x Pause Frames Received
- a count of MAC Control frames received on
this interface with an opcode indicating the PAUSE operation. This counter does
not increment when the interface is operating in half-duplex mode.
GVRP PDU's Received
- the count of GVRP PDU's received in the GARP
layer.
GVRP PDU's Transmitted
- the count of GVRP PDU's transmitted from the
GARP layer.
GVRP Failed Registrations
- the number of times attempted GVRP
registrations could not be completed.
GMRP PDU's received
- the count of GMRP PDU's received in the GARP
layer.
GMRP PDU's Transmitted
- the count of GMRP PDU's transmitted from the
GARP layer.
GMRP Failed Registrations
- the number of times attempted GMRP
registrations could not be completed.