Netgear GSM7312 FSM7326P User Manual - Page 176

config router vrrp removedetails, BootP and DHCP Relay Commands, show router bootpdhcprelay

Page 176 highlights

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software config router vrrp removedetails This command removes all VRRP configuration details of the virtual router configured on a specific interface. The parameter is the virtual router ID which has an integer value ranges from 1 to 255. Format config router vrrp removedetails BootP and DHCP Relay Commands show router bootpdhcprelay This command displays the BootP/DHCP Relay information. Format Maximum Hop Count Minimum Wait Time (Seconds) Admin Mode Server IP Address Circuit Id Option Mode Requests Received Requests Relayed Packets Discarded show router bootpdhcprelay The maximum allowable relay agent hops. The minimum wait time. Represents whether relaying of requests is enabled or disabled. The IP Address for the BootP/DHCP Relay server. The DHCP circuit Id option which may be enabled or disabled. The number or requests received. The number of requests relayed. The number of packets discarded. config router bootpdhcprelay circuitidoptionmode This command enables or disables the circuit ID option mode for BootP/DHCP Relay on the system. The parameter has possible values of enable and disable. Default Format disable config bootpdhcprelay circuitidoptionmode config router bootpdhcprelay adminmode This command enables or disables the forwarding of relay requests for BootP/DHCP Relay on the system. The parameter has possible values of enable and disable. 8-34 202-10009-01 Routing Commands

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-34
Routing Commands
202-10009-01
config router vrrp removedetails
This command removes all VRRP configuration details of the virtual router configured on a
specific interface. The parameter <vrID> is the virtual router ID which has an integer value ranges
from 1 to 255.
Format
config router vrrp removedetails
<slot.port> <vrID>
BootP and DHCP Relay Commands
show router bootpdhcprelay
This command displays the BootP/DHCP Relay information.
Format
show router bootpdhcprelay
Maximum Hop Count
The maximum allowable relay agent hops.
Minimum Wait Time
(Seconds)
The minimum wait time.
Admin Mode
Represents whether relaying of requests is enabled or disabled.
Server IP Address
The IP Address for the BootP/DHCP Relay server.
Circuit Id Option Mode
The DHCP circuit Id option which may be enabled or disabled.
Requests Received
The number or requests received.
Requests Relayed
The number of requests relayed.
Packets Discarded
The number of packets discarded.
config router bootpdhcprelay circuitidoptionmode
This command enables or disables the circuit ID option mode for BootP/DHCP Relay on the
system. The <mode> parameter has possible values of enable and disable.
Default
disable
Format
config bootpdhcprelay circuitidoptionmode
<enable|disable>
config router bootpdhcprelay adminmode
This command enables or disables the forwarding of relay requests for BootP/DHCP Relay on the
system. The <mode> parameter has possible values of enable and disable.