Netgear GSM7312 FSM7326P User Manual - Page 74
show eventlog, show msglog, show traplog, system trace information.
UPC - 606449030693
View all Netgear GSM7312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software show eventlog This command displays the event log, which contains error messages from the system. The event log is not cleared on a system reset. Format show eventlog File The file in which the event originated. Line The line number of the event. Task Id The task ID of the event. Code The event code. Time The time this event occurred. Note: Event log information is retained across a switch reset. show msglog This command displays the message log maintained by the switch. The message log contains system trace information. The trap log contains a maximum of 256 entries that wrap. Format show msglog Message The message that has been logged. Note: Message log information is not retained across a switch reset. show traplog This command displays the trap log maintained by the switch. The trap log contains a maximum of 256 entries that wrap. Format show traplog Number of Traps since last reset The number of traps that have occurred since the last reset of this device. Number of Traps since log last displayed The number of traps that have occurred since the traps were last displayed. Getting the traps by any method (terminal interface display, Web display, upload file from switch etc.) will result in this counter being cleared to 0. Log The sequence number of this trap. System Up Time The relative time since the last reboot of the switch at which this trap occurred. Trap The relevant information of this trap. Note: Trap log information is not retained across a switch reset. 7-12 202-10009-01 Switching Commands