Netgear GSM7312 FSM7326P User Manual - Page 139

transfer download serverip, transfer download path, remembers the last file name used.

Page 139 highlights

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software transfer download serverip This command configures the IP address of the server on which the file is located. Note: This command is valid only when the transfer mode is TFTP. See "transfer download mode" . Default 0.0.0.0 Format transfer download serverip transfer download path This command sets the directory path used to download the file. The switch "remembers" the last file path used. Note: This command is valid only when the Transfer Mode is TFTP. See "transfer download mode" on page 76. Details of the TFTP path are explained under the command transfer upload path . Default Blank Format transfer download path transfer download filename This command sets the name for the file that is downloaded to the switch. The switch "remembers" the last file name used. Append the file path to the file name if the string is less than 31 characters. Otherwise, use the transfer download path command, and the File Name will be appended to the File Path as is. Note: This command is valid only when the Transfer Mode is TFTP. See "transfer download mode" on page 76. Default Blank Format transfer download filename transfer download datatype This command sets the type of file to download to the switch. Default Format code transfer download datatype Switching Commands 202-10009-01 7-77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Switching Commands
7-77
202-10009-01
transfer download serverip
This command configures the IP address of the server on which the file is located.
Note:
This command is valid only when the transfer mode is TFTP. See “transfer download
mode” .
Default
0.0.0.0
Format
transfer download serverip
<ipAddr>
transfer download path
This command sets the directory path used to download the file. The switch “remembers” the last
file path used.
Note:
This command is valid only when the Transfer Mode is TFTP. See “transfer download
mode” on page 76. Details of the TFTP path are explained under the command
transfer upload
path
<path>
.
Default
Blank
Format
transfer download path
<path>
transfer download filename
This command sets the name for the file that is downloaded to the switch. The switch
“remembers” the last file name used.
Append the file path to the file name if the string is less than 31 characters. Otherwise, use the
transfer download path command, and the File Name will be appended to the File Path as is.
Note:
This command is valid only when the Transfer Mode is TFTP. See “transfer download
mode” on page 76.
Default
Blank
Format
transfer download filename
<name>
transfer download datatype
This command sets the type of file to download to the switch.
Default
code
Format
transfer download datatype
<code|config>