Netgear GSM7312 FSM7326P User Manual - Page 127

show radius stats, config dot1x adminmode, config dot1x port initialize

Page 127 highlights

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software show radius stats This command displays the RADIUS statistics that are not related to a specific server or to the accounting server. Format Invalid Server Addresses show radius stats The number of RADIUS Access-Response packets received from unknown addresses. clear radius stats This command clears all RADIUS statistics. Format clear radius stats config dot1x adminmode This command enables or disables authentication support on the switch. The default value is disable. While disabled, the dot1x configuration is retained and can be changed, but it is not activated. Default Format disable config dot1x adminmode config dot1x port initialize This command begins the initialization sequence on the specified port. This command is only valid if dot1x is enabled and the control mode for the specified port is 'auto'. Format config dot1x port initialize config dot1x port reauthenticate This command begins the reauthentication sequence on the specified port. This command is only valid if dot1x is enabled and the control mode for the specified port is 'auto'. Format config dot1x port reauthenticate Switching Commands 202-10009-01 7-65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Switching Commands
7-65
202-10009-01
show radius stats
This command displays the RADIUS statistics that are not related to a specific server or to the
accounting server.
Format
show radius stats
Invalid Server Addresses
The number of RADIUS Access-Response packets received from unknown
addresses.
clear radius stats
This command clears all RADIUS statistics.
Format
clear radius stats
config dot1x adminmode
This command enables or disables authentication support on the switch. The default value is
disable. While disabled, the dot1x configuration is retained and can be changed, but it is not
activated.
Default
disable
Format
config dot1x adminmode <enable/disable>
config dot1x port initialize
This command begins the initialization sequence on the specified port. This command is only valid
if dot1x is enabled and the control mode for the specified port is ‘auto’.
Format
config dot1x port initialize <slot.port>
config dot1x port reauthenticate
This command begins the reauthentication sequence on the specified port. This command is only
valid if dot1x is enabled and the control mode for the specified port is ‘auto’.
Format
config dot1x port reauthenticate <slot.port>