Netgear GSM7312 FSM7326P User Manual - Page 79
show snmpcommunity, config snmpcommunity accessmode, specification
UPC - 606449030693
View all Netgear GSM7312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software show snmpcommunity This command displays SNMP community information. Six communities are supported. You can add, change, or delete communities. The switch does not have to be reset for changes to take effect. The SNMP agent of the switch complies with SNMP Version 1 (for more about the SNMP specification, see the SNMP RFCs). The SNMP agent sends traps through TCP/IP to an external SNMP manager based on the SNMP configuration (the trap receiver and other SNMP community parameters). Format SNMP Community Name Client IP Address Client IP Mask Access Mode Status show snmpcommunity The community string to which this entry grants access. A valid entry is a casesensitive alphanumeric string of up to 16 characters. Each row of this table must contain a unique community name. An IP address (or portion thereof) from which this device will accept SNMP packets with the associated community. The requesting entity's IP address is ANDed with the Subnet Mask before being compared to the IP Address. Note: that if the Subnet Mask is set to 0.0.0.0, an IP Address of 0.0.0.0 matches all IP addresses. The default value is 0.0.0.0 A mask to be ANDed with the requesting entity's IP address before comparison with IP Address. If the result matches with IP Address then the address is an authenticated IP address. For example, if the IP Address = 9.47.128.0 and the corresponding Subnet Mask = 255.255.255.0 a range of incoming IP addresses would match, i.e. the incoming IP Address could equal 9.47.128.0 9.47.128.255. The default value is 0.0.0.0 The access level for this community string. May be specified by selecting Read/ Write or Read Only from the pull-down. Updates will be made to the switch by pressing the Submit button. The status of this community access entry. When this object is set to enabled, if the Community Name for this row is not unique among all valid rows, the set request will be rejected. Community names may be made invalid by selecting disable. Rows may be deleted by selecting Delete. Updates will be made to the switch by pressing the Submit button. config snmpcommunity accessmode This command restricts access to switch information. The access mode can be read-only (also called public) or read/write (also called private). Format config snmpcommunity accessmode Switching Commands 202-10009-01 7-17