Netgear GSM7312 FSM7326P User Manual - Page 101

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software telnet This command regulates new telnet sessions. If sessions are enabled, new telnet sessions can be established until there are no more sessions available. If sessions are disabled, no new telnet sessions are established. An established session remains active until the session is ended or an abnormal network error ends it. Default Format Mode Enabled telnet Privileged EXEC no telnet This command disables telnet sessions. If sessions are disabled, no new telnet sessions are established. Format no telnet Mode Privileged EXEC HTTP Commands ip http secure-port This command is used to set the sslt port where port can be 1-65535 and the default is port 443. Default 443 Format Mode ip http secure-port Privileged EXEC no ip http secure-port This command is used to reset the sslt port to the default value. Format no ip http secure-port Mode Privileged EXEC Switching Commands 202-10009-01_060204 8-35