Netgear GSM7312 FSM7326P User Manual - Page 224

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software show ip ospf database This command displays the link state database. This command takes no options. The information below will only be displayed if OSPF is enabled. Format show ip ospf database Mode Router ID Privileged EXEC and User EXEC Is a 32 bit dotted decimal number representing the LSDB interface. Area ID Is the IP address identifying the router ID. LSA Type LS ID The types are: router, network, ipnet sum, asbr sum, as external, group member, tmp 1, tmp 2, opaque link, opaque area. Is a number that "uniquely identifies an LSA that a router originates from all other self originated LSA's of the same LS type." Age Is a number representing the age of the link state advertisement in seconds. Sequence Is a number that represents which LSA is more recent. Checksum Options Is to total number LSA checksum. This is an integer. It indicates that the LSA receives special handling during routing calculations. show ip ospf interface This command displays the information for the IFO object or virtual interface tables. Format Mode IP Address Subnet Mask OSPF Admin Mode OSPF Area ID show ip ospf interface Privileged EXEC and User EXEC Represents the IP address for the specified interface. This is a configured value. Is a mask of the network and host portion of the IP address for the OSPF interface. This value was configured into the unit. This is a configured value. States whether OSPF is enabled or disabled on a router interface. This is a configured value. Represents the OSPF Area Id for the specified interface. This is a configured value. 9-42 202-10009-01_060204 Routing Commands