Netgear GSM7312 FSM7326P User Manual - Page 207

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software Format Mode no ip ospf Interface Config ip ospf areaid This command sets the OSPF area to which the specified router interface belongs. The value for is an IP address, formatted as a 4-digit dotted-decimal number that uniquely identifies the area to which the interface connects. Assigning an area id, which does not exist on an interface, causes the area to be created with default values. Format ip ospf areaid Mode Interface Config ip ospf authentication This command sets the OSPF Authentication Type and Key for the specified interface. The value of is either none, simple or encrypt. The [key] is composed of standard displayable, non-control keystrokes from a Standard 101/102-key keyboard. The authentication key must be 8 bytes or less if the authentication type is simple. If the type is encrypt, the key may be up to 256 bytes. If the type is encrypt a in the range of 0 and 255 must be specified. Default The default authentication type is none. Default The default password key is not configured. Unauthenticated interfaces do not need an authentication key. Default The default keyid is not configured. Unauthenticated interfaces do not need an authentication key id. Format Mode ip ospf authentication {none | {simple } | {encrypt }} Interface Config no ip ospf authentication This command sets the default OSPF Authentication Type for the specified interface. Format Mode no ip ospf authentication Interface Config Routing Commands 202-10009-01_060204 9-25