Netgear GSM7312 FSM7326P User Manual - Page 154
spanning-tree mst instance, spanning-tree mst priority, Format
UPC - 606449030693
View all Netgear GSM7312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software If the 'cost' token is specified, this command sets the path cost for this port within a multiple spanning tree instance or the common and internal spanning tree instance, depending on the parameter, to the default value, i.e. a pathcost value based on the Link Speed. If the 'port-priority' token is specified, this command sets the priority for this port within a specific multiple spanning tree instance or the common and internal spanning tree instance, depending on the parameter, to the default value, i.e. 128. Format no spanning-tree mst {cost | port-priority} Mode Interface Config spanning-tree mst instance This command adds a multiple spanning tree instance to the switch. The instance is a number within a range of 1 to 4094, that corresponds to the new instance ID to be added. The maximum number of multiple instances supported by the 7300 Series L3 Switch is 4. Format spanning-tree mst instance Mode Global Config no spanning-tree mst instance This command removes a multiple spanning tree instance from the switch and reallocates all VLANs allocated to the deleted instance to the common and internal spanning tree. The instance is a number that corresponds to the desired existing multiple spanning tree instance to be removed. Format no spanning-tree mst instance Mode Global Config spanning-tree mst priority This command sets the bridge priority for a specific multiple spanning tree instance. The instance is a number that corresponds to the desired existing multiple spanning tree instance. The priority value is a number within a range of 0 to 61440 in increments of 4096. 8-88 202-10009-01_060204 Switching Commands