Netgear GSM7312 FSM7326P User Manual - Page 60
Table 7-1., Command Mode, continued, vlan database, con interface, config <slot/port>
UPC - 606449030693
View all Netgear GSM7312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software Table 7-1. Command Mode (continued) Command Mode Access Method Prompt VLAN Mode From the Privileged User Exec mode, enter the vlan database command. Switch (Vlan) # Global Config Mode From the Privileged Exec mode, enter the configure command. Switch (Config)# Interface Config Mode Line Config Mode Policy Map Mode Policy Class Mode From the Global Configuration mode, enter the interface config command. From the Global Configuration mode, enter the lineconfig command. From the Global Configuration mode, enter the policy map command. From the Policy Map mode enter the class command. Switch (Interface-"if number")# Switch (line) # Switch (Config-policymap)# Switch (Config-policyclassmap)# Class Map Mode From the Global Config mode, enter the classmap command. Switch (Config-classmap)# Router Config OSPF Mode From the Global Configuration mode, enter the router ospf command Switch (Config-router)# Exit or Access Next Mode To exit to the Privileged Exec mode, enter the exit command, or press Ctrl-Z to switch to user exec mode. To exit to the Privileged Exec mode, enter the exit command, or press Ctrl-Z to switch to user exec mode. To exit to the Global Config mode enter exit. To return to user EXEC mode enter ctrl-Z. To exit to the Global Config mode enter exit. To return to User Exec mode enter ctrl-Z. To exit to the Global Config mode enter exit. To return to user EXEC mode enter ctrl-Z. To exit to Policy Map mode enter exit. To return to User Exec mode enter ctrl-Z. To exit to Global Config mode enter exit. To return to User Exec mode enter ctrl-Z. To exit to the Global Config mode enter exit. To return to User Exec mode enter ctrl-Z. 7-2 Mode-based CLI 202-10009-01_060204