Netgear GSM7312 FSM7326P User Manual - Page 145

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software show spanning-tree interface This command displays the settings and parameters for a specific switch port within the common and internal spanning tree. The is the desired switch port. The following details are displayed on execution of the command. Format show spanning-tree interface Mode Privileged EXEC and User EXEC Port mode Enabled or disabled. Port Up Time Since Counters Last Cleared Time since port was reset, displayed in days, hours, minutes, and seconds. STP BPDUs Transmitted Spanning Tree Protocol Bridge Protocol Data Units sent STP BPDUs Received Spanning Tree Protocol Bridge Protocol Data Units received. RST BPDUs Transmitted Rapid Spanning Tree Protocol Bridge Protocol Data Units sent RST BPDUs Received Rapid Spanning Tree Protocol Bridge Protocol Data Units received. MSTP BPDUs Transmitted Multiple Spanning Tree Protocol Bridge Protocol Data Units sent MSTP BPDUs Received Multiple Spanning Tree Protocol Bridge Protocol Data Units received. show spanning-tree mst detailed This command displays settings and parameters for the specified multiple spanning tree instance. The instance is a number that corresponds to the desired existing multiple spanning tree instance ID. The following details are displayed. Format show spanning-tree mst detailed Mode Privileged EXEC and User EXEC MST Instance ID MST Bridge Priority Time Since Topology Change in seconds Topology Change Count Number of times the topology has changed for this multiple spanning tree instance. Topology Change in Progress Value of the Topology Change parameter for the multiple spanning tree instance Switching Commands 202-10009-01_060204 8-79