Netgear GSM7312 FSM7326P User Manual - Page 167

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software no dot1x timeout This command sets the value, in seconds, of the timer used by the authenticator state machine on this port to the default values. Depending on the token used, the corresponding default values are set. Format no dot1x timeout {reauth-period | quiet-period | tx-period | supptimeout | server-timeout} Mode Interface Config dot1x user This command adds the specified user to the list of users with access to the specified port or all ports. The parameter must be a configured user. Format dot1x user { | all} Mode Global Config no dot1x user This command removes the user from the list of users with access to the specified port or all ports. Format no dot1x user { | all} Mode Global Config radius accounting mode This command is used to enable the RADIUS accounting function. Default Disabled Format radius accounting mode Mode Global Config no radius accounting mode This command is used to set the RADIUS accounting function to the default value - i.e. the RADIUS accounting function is disabled. Format no radius accounting mode Mode Global Config Switching Commands 202-10009-01_060204 8-101