Netgear GSM7312 FSM7326P User Manual - Page 128
show port-channel, Group Name, Group ID, Protocols, Interfaces, Format, Logical slot/port, Link State
UPC - 606449030693
View all Netgear GSM7312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software Group Name Group ID Protocol(s) VLAN Interface(s) This field displays the group name of an entry in the Protocolbased VLAN table. This field displays the group identifier of the protocol group. This field indicates the type of protocol(s) for this group. This field indicates the VLAN associated with this Protocol Group. This field lists the slot/port interface(s) that are associated with this Protocol Group. show port-channel This command displays an overview of all port-channels (LAGs) on the switch. Format Mode show port-channel { | all} Privileged EXEC Logical slot/port The logical slot and the logical port. Name Link State Admin Mode The name of this port-channel (LAG). You may enter any string of up to 15 alphanumeric characters. Indicates whether the Link is up or down. May be enabled or disabled. The factory default is enabled. Link Trap Mode This object determines whether or not to send a trap when link status changes. The factory default is enabled. STP Mode Mbr Ports The Spanning Tree Protocol Administrative Mode associated with the port or port-channel (LAG). The possible values are: Disable - Spanning tree is disabled for this port. Enable - Spanning tree is enabled for this port. A listing of the ports that are members of this port-channel (LAG), in slot/port notation. There can be a maximum of eight ports assigned to a given port-channel (LAG). Port Speed Speed of the port-channel port. Type This field displays the status designating whether a particular port-channel (LAG) is statically or dynamically maintained. The possible values of this field are Static, indicating that the portchannel is statically maintained; and Dynamic, indicating that the port-channel is dynamically maintained. 8-62 202-10009-01_060204 Switching Commands