Netgear GSM7312 FSM7326P User Manual - Page 78
show logging, Time Since Counters Last Cleared, Format, Number of Traps since last reset
UPC - 606449030693
View all Netgear GSM7312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software protocol. A possible reason for discarding a packet could be to free up buffer space. Most Address Entries Ever Used - The highest number of Forwarding Database Address Table entries that have been learned by this switch since the most recent reboot. Address Entries in Use - The number of Learned and static entries in the Forwarding Database Address Table for this switch. Maximum VLAN Entries - The maximum number of Virtual LANs (VLANs) allowed on this switch. Most VLAN Entries Ever Used - The largest number of VLANs that have been active on this switch since the last reboot. Static VLAN Entries - The number of presently active VLAN entries on this switch that have been created statically. Dynamic VLAN Entries - The number of presently active VLAN entries on this switch that have been created by GVRP registration. VLAN Deletes - The number of VLANs on this switch that have been created and then deleted since the last reboot. Time Since Counters Last Cleared The elapsed time, in days, hours, minutes, and seconds, since the statistics for this switch were last cleared. show logging This command displays the trap log maintained by the switch. The trap log contains a maximum of 256 entries that wrap. Format show logging Mode Privileged EXEC Number of Traps since last reset The number of traps that have occurred since the last reset of this device. Number of Traps since log last displayed The number of traps that have occurred since the traps were last displayed. Getting the traps by any method (terminal interface display, Web display, upload file from switch etc.) will result in this counter being cleared to 0. Log The sequence number of this trap. 8-12 202-10009-01_060204 Switching Commands