Netgear GSM7312 FSM7326P User Manual - Page 129

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software Active Ports This field lists the ports that are actively participating in the portchannel (LAG). show storm-control This command displays switch configuration information. Format show storm-control Mode Privileged EXEC Broadcast Storm Recovery Mode May be enabled or disabled. The factory default is disabled. 802.3x Flow Control Mode May be enabled or disabled. The factory default is disabled. show vlan This command displays detailed information, including interface information, for a specific VLAN. Format show vlan , where the ID is a valid VLAN identification number Mode Privileged EXEC and User EXEC VLAN ID VLAN Name There is a VLAN Identifier (VID) associated with each VLAN. The range of the VLAN ID is 1 to 4094. A string associated with this VLAN as a convenience. It can be up to 16 alphanumeric characters long, including blanks. The default is blank. VLAN ID 1 always has a name of `Default`. This field is optional. VLAN Type slot/port Type of VLAN, which can be Default, (VLAN ID = 1), a static (one that is configured and permanently defined), or Dynamic (one that is created by GVRP registration). Indicates by slot id and port number which port is controlled by the fields on this line. It is possible to set the parameters for all ports by using the selectors on the top line. Current Determines the degree of participation of this port in this VLAN. The permissible values are: Include - This port is always a member of this VLAN. This is equivalent to registration fixed in the IEEE 802.1Q standard. Switching Commands 202-10009-01_060204 8-63