Netgear GSM7312 FSM7326P User Manual - Page 160
users snmpv3 authentication, Default, Format
UPC - 606449030693
View all Netgear GSM7312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software users snmpv3 authentication This command specifies the authentication protocol to be used for the specified login user. The valid authentication protocols are none, md5 or sha. If md5 or sha are specified, the user login password will be used as the snmpv3 authentication password. The is the login user name for which the specified authentication protocol will be used. Default no authentication Format users snmpv3 authentication {none | md5 | sha} Mode Global Config no users snmpv3 authentication This command sets the authentication protocol to be used for the specified login user to none. The is the login user name for which the specified authentication protocol will be used. Format users snmpv3 authentication Mode Global Config users snmpv3 encryption This command specifies the encryption protocol and key to be used for the specified login user. The valid encryption protocols are none or des. The des protocol requires a key, which can be specified on the command line. The key may be up to 16 characters long. If the des protocol is specified but a key is not provided, the user will be prompted for the key. If none is specified, a key must not be provided. The is the login user name for which the specified encryption protocol will be used. Default no encryption Format users snmpv3 encryption {none | des [key]} Mode Global Config no users snmpv3 encryption This command sets the encryption protocol to none. The is the login user name for which the specified encryption protocol will be used. Format no users snmpv3 encryption Mode Global Config 8-94 202-10009-01_060204 Switching Commands