Netgear GSM7312 FSM7326P User Manual - Page 359
R, RADIUS, Real-Time Operating System, Resource Reservation Setup Protocol, router
UPC - 606449030693
View all Netgear GSM7312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 359 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software R RADIUS Short for Remote Authentication Dial-In User Service, RADIUS is an authentication system. Using RADIUS, you must enter your user name and password before gaining access to a network. This information is passed to a RADIUS server, which checks that the information is correct, and then authorizes access. Though not an official standard, the RADIUS specification is maintained by a working group of the IETF. Real-Time Operating System RTOS is a component of the OSAPI module that abstracts operating systems with which other systems can interface. Resource Reservation Setup Protocol RSVP is a new Internet protocol being developed to enable the Internet to support specified Qualities-of-Service (QoS). Using RSVP, an application will be able to reserve resources along a route from source to destination. RSVP-enabled routers will then schedule and prioritize packets to meet the prioritization assigned by QoS. RSVP is a chief component of a new type of Internet being developed, known broadly as an integrated services Internet. The general idea is to enhance the Internet to support transmission of real-time data. RIP See "Routing Information Protocol" on page 17. router A device that forwards data between networks. An IP router forwards data based on IP source and destination addresses. Routing Information Protocol RIP is the routing protocol used by the routed process on Berkeley-derived UNIX systems. Many networks use RIP; it works well for small, isolated, and topologically simple networks. RIPng Routing Information Protocol, new generation. RMON Short for remote monitoring, a network management protocol that allows network information to be gathered at a single workstation. Whereas SNMP gathers network data from a single type of Management Information Base (MIB), RMON 1 defines nine additional MIBs that provide a much richer set of data about network usage. For RMON to work, network devices, such as hubs and switches, must be designed to support it. The newest version of RMON, RMON 2, provides data about traffic at the network layer in addition to the physical layer. This allows administrators to analyze traffic by protocol. Glossary 202-10009-01_060204 C-17