Netgear GSM7312 FSM7326P User Manual - Page 232

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software show ip route This command causes the entire route table to be displayed. This commands takes no options. Format show ip route Mode Network Address Privileged EXEC and User EXEC Is an IP address identifying the network on the specified interface. Subnet Mask Is a mask of the network and host portion of the IP address for the router interface. Protocol Next Hop Intf Tells which protocol added the specified route. The possibilities are: local, static, OSPF or RIP. The outgoing router interface to use when forwarding traffic to the next destination. Next Hop IP Address The outgoing router IP address to use when forwarding traffic to the next router (if any) in the path toward the destination. Total Number of Routes The total number of routes. show ip route bestroutes This command causes the entire route table to be displayed. This commands takes no options. Format show ip route bestroutes Mode Privileged EXEC and User EXEC Network Address Is an IP route prefix for the destination. Subnet Mask Protocol Is a mask of the network and host portion of the IP address for the specified interface. Tells which protocol added the specified route. The possibilities are: local, static, OSPF or RIP. Next Hop Intf The outgoing router interface to use when forwarding traffic to the next destination. Next Hop IP Address The outgoing router IP address to use when forwarding traffic to the next router (if any) in the path toward the destination. The next router will always be one of the adjacent neighbors or the IP address of the local interface for a directly attached network. Total Number of Routes The total number of routes in the route table. 9-50 202-10009-01_060204 Routing Commands