Netgear GSM7312 FSM7326P User Manual - Page 59

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software Chapter 7 Mode-based CLI The CLI groups all the commands in appropriate modes according to the nature of the command. A sample of the CLI command modes are described below. Each of the command modes support specific 7300 Series L3 Switch commands. • User Exec Mode • Privileged Exec Mode • Global Config Mode • Vlan Mode • Interface Config Mode • Line Config Mode • Policy Map Mode • Policy Class Mode • Class Map Mode • Router Config OSPF Mode • Router Config RIP Mode • DHCP Pool Configuration Mode The Command Mode table captures the command modes, the prompts visible in that mode and the exit method from that mode. Table 7-1. Command Mode Command Mode Access Method Prompt User Exec Mode Privileged Exec Mode This is the first level of access. Perform basic tasks and list system information. From the User Exec Mode, enter the enable command. Switch> Switch# Exit or Access Next Mode Enter Logout command To exit this mode, enter exit or press Ctrl-Z. Mode-based CLI 7-1 202-10009-01_060204