Netgear GSM7312 FSM7326P User Manual - Page 220

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software IP Address Is an IP address representing the subnet configuration of the router interface. This value was configured into the unit. Subnet Mask Is a mask of the network and host portion of the IP address for the router interface. This value was configured into the unit. Routing Mode Is the administrative mode of router interface participation. The possible values are enable or disable. This value was configured into the unit. Administrative Mode Is the administrative mode of the specified interface. The possible values of this field are enable or disable. This value was configured into the unit. Forward Net Directed Broadcasts Displays whether forwarding of network-directed broadcasts is enabled or disabled. This value was configured into the unit. Active State Displays whether the interface is active or inactive. An interface is considered active if its link is up and it is in forwarding state. Link Speed Data Rate Is an integer representing the physical link data rate of the specified interface. This is measured in Megabits per second (Mbps). MAC Address Is the burned in physical address of the specified interface. The format is 6 two-digit hexadecimal numbers that are separated by colons. Encapsulation Type Is the encapsulation type for the specified interface. The types are: Ethernet or SNAP. show ip interface brief This command displays summary information about IP configuration settings for all ports in the router. This command takes no options. Format Mode show ip interface brief Privileged EXEC and User EXEC Slot/Port The interface being displayed on the row. IP Address IP Mask The IP address of the routing interface in 32-bit dotted decimal format. The IP mask of the routing interface in 32-bit dotted decimal format. 9-38 202-10009-01_060204 Routing Commands