Netgear GSM7312 FSM7326P User Manual - Page 104

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software no ip ssh This command is used to disable SSH. Format no ip ssh Mode Privileged EXEC ip ssh protocol This command is used to set or remove protocol levels (or versions) for SSH. Either SSH1 (1), SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set. Default 1 and 2 Format Mode ip ssh protocol [1] [2] Privileged EXEC show ip ssh This command displays the ssh settings. Format Mode Administrative Mode show ip ssh Privileged EXEC This field indicates whether the administrative mode of SSH is enabled or disabled. Protocol Level The protocol level may have the values of version 1, version 2 or both versions 1 and version 2. Connections This field specifies the current ssh connections. Device Configuration Commands addport This command adds one port to the port-channel (LAG). The first interface is a logical slot and port number of a configured port-channel. Note: Before adding a port to a port-channel, set the physical mode of the port. See 'speed' command. 8-38 202-10009-01_060204 Switching Commands